Membership

Membership

Upon Ten years of concentration and development, Forenergy’s footsteps spread all over the world.

Standard Inquiry

API, ISO, GB,SY,ASME,ASNT, ASTM, NACE, AWS, JB, DNV,DIN,AAR, AISI, AISC, ANSI, AREA,
AS, BS, CSA, IBR, JIS, MIL, MSS, NEPA, OCIMF, SSPC, TEMA, ABS, BV, Aramco’s AMSS/AIP/AES/ACS,
以及客户所定标准。

  • API Spec 5CRA Specification for Corrosion-resistant Alloy Seamless Tubes for Use as Casing, Tubing, and Coupling Stock
    API RP 5SI Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier
    API RP 2SIM Structural Integrity Management of Fixed Offshore Structures
    API TR 941 The Technical Basis Document for API RP 941
    API Std 6ACRA Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment Second Edition [Superseded: API SPEC 6A718, API SPEC 6A718]
    API Std 682 Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps
    API Std 681 Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services
  • ASTM B21 Standard Specification for Naval Brass Rod, Bar, and Shapes
    ASTM B171 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
    ASTM C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
    ASTM C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
    ASTM C552 Standard Specification for Cellular Glass Thermal Insulation
    ASTM C351 Standard Test Method for Mean Specific Heat of Thermal Insulation
    ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASME Y14.6 Screw Thread Representation螺纹表示法
    ASME PTC 10 Compressors and Exhausters压缩机和排气机
    ASME BPVC XII 2017 ASME Boiler and Pressure Vessel Code, Section XII: Rules for Construction and Continued Service of Transport Tanks 运输罐建造和延续使用规则
    ASME BPVC IX ASME Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications 焊接和钎焊评定标准
    ASME BPVC VIII-3 ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels ASME 第VIII卷第三册 高压容器建造规则
    ASME BPVC VIII-2 ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules ASME第VIII卷第二册 压力容器建造另一规则
    ASME BPVC VIII-1 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels ASME第VIII卷第一册 压力容器建造规则
  • NACE SP0490 (formerly RP0490) Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)
    NACE SP0394 (formerly RP0394) Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
    NACE TM0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking 管道、压力容器抗氢致开裂钢性能评价的试验方法
    NACE TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments H2S环境中抗特殊形式的环境开裂材料的实验室试验方法
    NACE MR0176 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments
    NACE MR0175/ISO 15156 Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production
  • ISO 9906 Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
    ISO 8503-4 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of
    ISO 8503-2 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates —Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel —Comparator procedure
    ISO 8503-1 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of ab
    ISO 8502-3 Preparation of steel Substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape met
    ISO 8501-4 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
    ISO 8501-3 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
  • GB5908-2005 石油储罐阻火器
    GB/T9112 钢制管法兰 类型与参数
    GB/T9109.2 石油和液体石油产品动态计量 第2部分:流量计安装技术要求
    GB/T4980 容积式压缩机噪声的测定
    GB/T11352 一般工程用铸造碳钢件
    GB/T 985.2 埋弧焊的推荐坡口
    GB/T 985.1 气焊、焊条电弧焊、气体保护焊和高能束焊的推荐坡口
  • JB/T8473 仪表阀组
    JB/T 10563 一般用途离心通风机技术条件
    JB/T 9244 玻璃板液位计
    JB/T 9218 渗透探伤方法
    JB/T 9092 阀门的检验与试验
    JB/T 9078.2 天然气分离设备 性能试验方法
    JB/T 9078.1 天然气分离设备 技术条件
  • SY/T 10042 海上生产平台管道系统设计和安装的推荐作法
    SY/T 10041 石油设施电气设备安装一级一类和二类区域划分
    SY/T 10037 海底管道系统
    SY/T 10031 寒冷条件下结构和海管规划、设计和建造的推荐作法
    SY/T 10030 海上固定平台规划.设计和建造的推荐作法.工作应力设计法
    SY/T 10025 海洋钻井装置作业前检验规范
    SY/T 10024 井下安全阀系统的设计、安装、修理和操作的推荐作法
  • NB/T 47039 可变弹簧支吊架
    NB/T 47038 恒力弹簧支吊架
    NB/T 47034 工业锅炉技术条件
    NB/T 47019.1 锅炉、热交换器用管订货技术条件_第1部分:通则
    NB/T 47018.7 承压设备用焊接材料订货技术条件 第7部分:钛及钛合金焊丝和填充丝
    NB/T 47018.6 承压设备用焊接材料订货技术条件 第6部分:铝及铝合金焊丝和填充丝
    NB/T 47018.5 承压设备用焊接材料订货技术条件 第5部分:堆焊用不锈钢焊带和焊剂
 LOGIN VIEW 

MFR. Index

Customer Satisfaction

Thank you very much for your great support and trust for "FORENERGY" in the past years.
In the days to come, "FORENERGY" will continue to stand in the customer's position, try our best to fulfill customer's requirements, bring cost cutting and efficiency for customer, at FORENERGY we strive hard to achieve maximum customer satisfaction. In order to further understand and analyze the customer's satisfaction for our services and to implement the “service has no end” tenet, we will carry out the Customer Satisfaction Surveys.

In order to better communicate with you and make our cooperation more enjoyable, please fill out the form as below: (Required)

    Login